Xantech Electronic Accessory HDMI3X1 User Manual

HDMI3X1  
User Manual  
- 1 -  
 
INSTRUCTIONS  
1) Connect the supplied cables from the HDTV HDMI sources into the 3x1 HDMI Switcher inputs.  
2) Connect the cables from your display (monitor or projector) into the HDMI out of the 3x1 HDMI  
Switcher.  
3) Plug the 5VDC power supply into the 3x1 HDMI Switcher.  
How to Control the 3x1 HDMI Switcher  
Use the RMT3-IR remote control to toggle between sources.  
RMT3-IR INSTRUCTIONS  
1) Remove battery cover from the back of the RMT3-IR remote.  
2) Verify that dip switches 1 & 2 are in the down (OFF) position.  
3) Insert the battery, hold the battery so that you can see the positive side facing up. The side that is  
not marked must be facing down.  
4) Test the RMT3-IR remote by pressing ONLY one button at a time. The indicator light on the remote  
will flash once each time you press a button. WARNING: Do not press multiple buttons  
simultaneously and do NOT press buttons rapidly. These actions will cause the remote to reset and  
steps 1-4 will have to be repeated.  
Note: The RMT3-IR ships with two batteries. One battery is required for operation, the second battery  
is complimentary.  
The optional IR extender allows you to relocate your HDMI Switcher and still have IR control of the  
HDMI Switcher  
RMT3-IR CODE CONFLICTS  
There are matching pairs of dip switches underneath the Switcher unit and under the remote battery  
cover. Switch 1 & 2 on the Remote and Switch 1 & 2 underneath the unit are the matching switches.  
These switches need to be matched for the remote to communicate with the switcher. There are 4  
possible sets of IR codes and at least one of these sets should be able to resolve any IR conflicts with  
other home theater devices.  
- 3 -  
 
- 4 -  
 
IREXTENDER  
1) Plug the IR extender into the Remote port on the front of the Switcher Unit  
2) Flip the Dip Switch 1 underneath the unit to the ON position  
SPECIFICATIONS  
Video Amplifier Bandwidth  
Input Video Signal  
Input DDC Signal  
Single Link Range  
Input Connector Type  
Output Connector Type  
Power Supply  
1.65 Gbps  
1.2 volts p-p  
5 volts p-p (TTL)  
1080p / 1920 x 1200  
HDMI type A 19 pin female  
HDMI type A 19 pin female  
5V DC  
Power Consumption  
Dimensions  
Shipping Weight  
5 watts (max)  
9.375”W x 1”H x 2.75”D  
4 lbs.  
Technical Support  
Mailing Address  
Hours:  
Phone:  
7AM-5PM Pacific  
800.843.5465  
press 2 for Tech Support  
800.492.6832  
Xantech Corporation  
13100 Telfair Avenue, 2/F  
Sylmar, CA 91342  
Fax:  
email:  
HDMI3X1 User Manual © 2007 Xantech Corporation  
This document is copyright protected. No part of this manual may be copied or reproduced in any  
form without prior written consent from Xantech Corporation.  
Document Number 08905127A  
- 5 -  
 

Well Traveled Living Indoor Fireplace 60353 User Manual
Whirlpool Ice Maker CHE 12RC User Manual
Whirlpool Ventilation Hood GZ8330XLS1 User Manual
Whynter Building Set KS 1100 User Manual
Windsor Carpet Cleaner 10070090 User Manual
Xerox Network Router 2314 User Manual
XM Satellite Radio Satellite Radio XHD2H1 User Manual
Yamaha Stereo Amplifier AX 497 User Manual
Zanussi Ventilation Hood 641280 User Manual
Zanussi Washer FL 811 User Manual