Xbrand Fan XB 1002F User Manual

360° USB 2.0 Laptop Stand  
with Cooling Fan  
user’s guide  
brand  
model: XB-1002F  
Thank you for purchasing an Xbrand 360° 2.0 laptop stand with cooling fan.  
Features & how they function  
3.  
Display height adjustment (Actuator Button): Pressing the Actuator Button allows you to  
adjust the position of the Cooling Cradle and thereby your laptop’s display height to any one of  
four preset positions.  
To change positions perform the following steps:  
1. Clasp the corner of your laptop and the bottom of the Cooling Cradle so your laptop and the  
Cooling Cradle are firmly grasped between your thumb and fingers.  
1.  
2. Press down on the Actuator Button (located on unit’s base) with your other hand.  
2.  
3. Push the Cooling Cradle forwards or backwards approximately 1/2(1.2 cm) and release  
pressure on the Actuator Button.When you hear aclick, the Cooling Cradle has firmly locked  
into one of the four preset positions.  
DO NOT REMOVE HAND FROM CRADLE UNTIL YOU HEAR THE  
“CLICK, INDICATING IT HAS LOCKED INTO POSITION.  
4. Release your clasp on the Cooling Cradle and your laptop once you are certain the Cooling  
Cradle has locked into position.  
2.  
5. Repeat steps 1-4 to raise or lower system to next preset position.  
Front drive access (Folding Retainer): The Folding Retainer located on the bottom of the  
Cooling Cradle allows you to gain quick access to drives, bays or buttons located on your  
laptop’s front edge.  
1.  
1. Lower the Cooling Cradle to its lowest position.  
2. Push the ‘slide switch(on front of Cooling Cradle) towards the right and, gently pull the  
retainer towards you.When finished, push the retainer back to its original position to lock it  
into place. Do not push on the retainer to adjust height of the Cooling Cradle.  
ONLY ACCESS FRONT EDGE DRIVES WHEN COOLING CRADLE IS  
IN ITS LOWEST POSITION.  
360° rotation: Non-skid rollers on the bottom of your unit allow  
it to rotate 360° to share your laptop’s display or access rear  
connections.  
Cooling Fan: Its integrated cooling fan can enhance your  
computer’s speed and longevity. 11 blades and a sculpted,  
concave design combine to bathe your laptop in cool, ambient  
air while supporting proper system ventilation. The on/off switch for the fan is located at the  
base of the unit on the left side.  
Integrated 4 Port USB 2.0 hub (USB hub equipped models only): A 4-port USB 2.0 Hub is  
built into your unit. All 4 ports are located at the rear of the unit. Use these ports to attach USB  
powered peripherals: external keyboards, mice, printers, scanners, hard drives, optical drives, etc.  
Placement of your 360° 2.0 laptop stand with cooling fan  
Proper configuration of your workstation may help relieve back, shoulder and neck strain  
that often accompany long hours of working on a laptop computer. For a complete set of  
instructions on how to properly set up your workstation, see the US government’s CDC website:  
18”–30(46-76 cm)  
LCD screen: Adjust height so the top of your laptop’s display is at or just below eye level when  
you are properly seated in an upright position. Move the unit so that your laptop’s LCD screen is  
approximately 18”–30(46–76 cm) from your eyes.  
Keyboard & mouse: An external keyboard and mouse are highly recommended when using  
this product. Adjust keyboard height so your forearms are parallel to the floor (approx 90° angle  
at elbow). Adjust the slope of your keyboard so that the backs of your wrists are flat (in a neutral  
position), and not bent back while typing.Your mouse should be at the same height.  
 

Weed Eater Trimmer 530088959 User Manual
Weil McLain Boiler WMBC 1A User Manual
Weil McLain Water Heater GL E223 ADOC 0311 User Manual
Whirlpool Air Conditioner AR1000 User Manual
Whirlpool Washer Dryer LCE4332PQ0 User Manual
Yamaha MiniDisc Player DOU 10 User Manual
Yamaha Speaker HS5 User Manual
Yamaha Stereo Amplifier DSP AX3200 User Manual
Zanussi Washer ZWX 1505 W User Manual
Zenith Projector DXG 210 User Manual